Make your own free website on Tripod.com
Climate - system and waste gas system

DEVICE EXECUTION AT4

device execution and equipment assembly after EN 1886.Gehaeuserahmenkonstruktion
from 38 mm sendzimirverzinkten square profiles with 1.5 mm
Wall thickness by means of device corners connected.
Tool-making way without welded joints
and thus completely detachable. Mechanical stability after EN 1886.
Flexible one Equipment design by raster building method.
Removable, 47 mm strong, doubleshelled lining panels. To Waerme-und
Acoustic insulation inside with a not inflammable mineral wool according to DIN 4102
Building material class A1, specific gravity 55kg/m
accordingly lined.
Housing features:
- mechanical stability class 1A
- housing leakage Class B
- thermal isolation class T3
- Cold bridge factor Class TB3

- Middle sound reduction index 34 dB
- insertion loss De after EN 1886:
- 125,250,500 1k 2k 4k 8k cycles per second
15,8 24.4 30.2 35.1 35.4 35.8 36.5 dB
Framework with housing inner surfaces justified. Inner surfaces perfectly smoothly,
without lips. Panel interior and outer shell from 1.0 mm sendzimirverzinktem steel sheet. Panel completely after the
completion powder-coats, layer thickness min.60 m, ral 7032, thus no open lips.
Patented thermal decoupling between the panel bowls.
Basic frame galvanizes and powder-coats, with shackle feed over basic frames.
Alternative heights: 208, 308, 408 mm.
Structure of door such as housing panels, with clamp strap catches,
Quantity 20x20 - 49x32 with hand lever catches.

LIGHT SWITCH
Switch with control light.
 
 
 
 
 

FLAP ACTUATOR constantly
Constant one Regulation (0-10V)
Supply voltage 230 V, 50/60 cycles per second.
Control drive for flaps to 3 m
Torque at least 16 Nm

WIRING LIGHTING
Wiring of the lighting and
Light switch on clamping box.

LIGHTING
Humid room oval light
Enclosure IP44.

SHUTTER
Starting from quantity 20x20:
With, galvanized steel section lamellas moving in opposite directions and torsionally stiff,
sealed by means of special rubber lips. Aluminum on the inside
gear wheels. Framework from galvanized steel sheet, depth 175 mm.
Stocks from PP.

CANVAS CONNECTING PIECE
From polyester tissue particularly zerreissfest. With reciprocally rotating
Duct connection flange hermetically connected.
Inclusive one. Potential equalization.

SEDIMENT BOWL
Diameter 200 mm

of HAND LEVERS

GITTERWAND
Execution in accordance with. UVV.
Consisting of galvanized steel sheet
also in-punched long holes to
Insight to the fan engine unit.

DIAGONAL TUBING MANOMETER 0-500 PA

BAG FILTERS
With bag filter cartridge up to filter quality G4 from chemical fibre fleece
starting from filter quality F5 from glass fiber fleece with spin fleece lamination. No abrasion
of medium fibers. Tearing up celebration to max. Final pressure loss of 600 Pa.
Optimal one Air distribution by nylon spacer between the Filterbeu
teln. Complete filter cartridge in EURO bays with special retaining springs
fastened and in the housing installs.
Up to filter quality G4 and housing width 1300 mm of filter cartridges with in
build-frame laterally from the housing extendable.

Starting from housing width 1606 mm or starting from filter quality F5 of filter cartridges
with bays according to DIN installs 1946 T4 in the housing firmly.
Filter changes dust or clean-air-laterally (with ral only dust-air-laterally)

EXTENDABLE ONE FEELER FRAMEWORK

HEATER CU/al for PWW
Existing from smooth copper tubes with mechanically pressed on
Aluminum lamellas. Lamellenteilung 2.1 / 2.5 mm.
Set in in galvanized stahlblechrahmen. Heat exchanger laterally
removable. Collecting pipes from steel. Threaded connection connecting piece through
hermetically locking Gummirosetten led out from the housing.

Tau designed for max. Operating pressure 16 bar, max. Vor-
run temperature 120 C. Exhaust and emptying connecting piece by others.

COOLLY CU/al for passenger car
Consisting of smooth copper tubes with mechanically pressed on
Aluminum lamellas. Lamellenteilung 2.1 / 2.5 mm.
Set in in galvanized stahlblechrahmen. Heat exchanger laterally
removable. Collecting pipes from copper. Threaded connection connecting piece through
hermetically locking Gummirosetten led out from the housing. Lead-in duct with Armaflex isolates. Tau designed for
max.
Operating pressure 16 bar.
Entlueftungs-und emptying connecting piece
by others. Inclusive one. Condensate tub with mist eliminator.

CONDENSATE TUB with MIST ELIMINATOR
High-grade steel tub in the equipment floor sinks with flanged sockets DN 40 PVC
outward led. Mist eliminator from temperature-steady
Polypropylene plastic profiles, set in within frameworks out
High-grade steel 1,4301, laterally extendable.

RING CIRCUIT
For regulation stat. Difference of pressure. Sucking and printing-laterally
arranged plastic ring line. Determination of the actual flow rate
by measurement of the differential pressure in connection of the provided device characteristic.

REPAIR SWITCH
As off-load switches:
With 2 auxiliary contacts (1 opener, 1 normally open contact).
Enclosure IP65.
At the fan section installed and protected wires.
ELECTRIC MOTOR S
Fabr. Siemens
Three-phase alternating current Driving motor, oberflaechenge
cools, perfectly closed, cooling type
IC 0141 after International Electronical Commission publication 34-6, through
External exhaust. Design B, enclosure IP 55,
Insulating class F, engine full protection
through PTC resistor.
 

FAN UNIT ZS
For the assembly of a on both sides sucking radial fan
together with electric motor and keilriemenantrieb
on galvanized steel underbody installs. Engine for retightening
the drive belt on engine clamping carriages with more central
Adjusting screw fastened. Flexible sealing between Ventila
torausblas and geraetekammer by means of hermetic canvas connecting piece.
Entire power supply unit on printing-loaded feather/spring shock-mounts.
Fan unit laterally removable. Keilriemenantrieb existing
from easily changeable drive disks with TAP he LOCK clamping chucks.
Potential equalization between fan motoraggregat and device housing.
Performance data of the fan documents by TUEV checked
Device characteristic. Max. interpretation deviation 5 %.

FAN TYPE 15
Fabr. Gebhardt - Rotavent
Bilaterally sucking radial fan. Spiral form housing folded.
Stable reinforcement framework with foot frame parts.
Withdrawal flange according to DIN 24,159, Bl.3.
Self-aligning (ball) bearing with cast housing and tubing prop attachment.
Radial impeller also backwards-curved hollow section shovels,
degreased, iron-phosphatizes and coats, statically
and dynmisch balanced, balancing quality G 2.5 according to DIN ISO 1940 part of 1.
Concentric wave, at both ends for the accommodation of
V-belt pulleys on standardized diameters according to DIN 748 part of 1
issued.

TRANSPORT DEVICE

SHUTTER
To quantity 20x16:
With torsionally stiff moving in opposite directions
Hollow section aluminum lamellas, abge
seals by means of special profile rubber.
On the inside one Plastic gear wheels.
Framework from galvanized steel sheet,
Deep 125 mm.
FLAP ACTUATOR AUF/zu
AUF/ZU control 230 V 50/60 cycles per second.
Control drive for flaps to 3 m
Torque at least 16 Nm.

FAN TYPE 11
Fabr. Gebhardt - Rotavent, bilateral sucking radial fan.
Spiral form housing folded, with convertible feet,
Withdrawal flange according to DIN 24,159, Bl.3. Maintenance-free groove
ball bearing with profile prop attachment. Radial impeller also
backwards-curved hollow section shovels, degreases,
iron-phosphatized and coated, statically and dynamically balanced,
Balancing quality G 2.5 according to DIN ISO 1940Teil 1. Concentric wave, at both
Ends for the accommodation of V-belt pulleys on standardized
Diameter after
DIN 748 part of 1 issued.

STEAM-humidifier-empty-hurry
with door, sediment bowl, lighting and drip tray V

LV position: 1
Supply air device
SUPPLY AIR:
Volume STR: 36000 m/h
ext. Printing: 800 Pa
Luftgeschw.: 3.0 m/s

consisting of:

MIXING CHAMBER SUPPLY AIR (1)

FILTER SUPPLY AIR (2)
- bag filters
- diagonal tubing manometer 0-500 Pa

HEATER SUPPLY AIR (3)
- heater Cu/Al for PWW
- extendable feeler framework

RADIATOR SUPPLY AIR (4)
- radiator Cu/Al for passenger car
- condensate tub with mist eliminator

EMPTY CHAMBER SUPPLY AIR (5)
* STEAM-humidifier-empty-hurry

FAN SUPPLY AIR (6)
- fan type 15
- electric motor S
- repair switches
- ring circuit
- canvas connecting pieces
 

Technical data

MISCHK. SUPPLY AIR (1)
Jalous. kl.: 25 Pa

Accessories
Flap connection

FILTER SUPPLY AIR (2)
Type: F743
dp interpretation: 126 Pa
dp start: 53 Pa
dp end: 200 Pa
Filter class G4
Anstr.Geschw: 3,0 m/s
Filter surface: 17.1 m
Bag lg.: 360 mm
Maintenance: dust-air-laterally

accessories
Schraegrohrmanom. 500 Pa

HEATER SUPPLY AIR (3)
Type PWW Cu/Al A
dp air 62 Pa
Air inlet 18,0 C
Air outlet 30,0 C
Performance 145 kW
Tubing series 2 n
dp medium: 1 kPa
Medium te/ta: 70 / 50 C
Rolling over mg: 6379 l/h
Glycol proportion 0 %
Amount of filling 26,5 l
Nominal size 2*65 DN
LT/Kreise 2.1 / 68

accessories
Freeze protection framework

COOLLY SUPPLY AIR (4)
Type: PKW Cu/Al A
dp air WT: 236 Pa
Air inlet: 38.0 / 60 C/%
Air outlet: 26.0 / 99 C/%
Performance 270.0 kW
dp air TA: 55 Pa
Tubing series 6 n
dp medium: 19.8 kPa
Medium te/ta: 6 / 12 C
Rolling over mg: 38525 l/h
Glycol proportion: 0 %
Amount of filling: 71.2 l
Nominal size: 2*100 DN
LT/Kreise: 2.1 / 134

STEAM-humidifier-empty-hurry
SUPPLY AIR (5)
Length 1530,0 mm
dp air: 0

accessories
Door
Drip tray
FAN SUPPLY AIR (6)
Type RZR15-710
Volumenstr. 36000 m/h
dp Ges(pfa) 1304 Pa
Pw engine erf: 19.3 kW
Pw max.: 50.0 kW
Effect degree. tW 81 %
Wirk.grd.faM 61 %
Betriebsdrehz 1433 1/min
Number of revolutions max: 1950 1/min

ENGINE: 180 standard / FC
Type 1LA2186-a60-za11
Nominal number of revolutions: 1460 U/min
Voltage 400/690 V
Rated current 41.0/23.6 A
Rated output 22.0 kW
Effect degree 91 %
Betriebsdrehz 1433 1/min
Number of revolutions max: 1497 1/min
LwA: 93 dB(A)
Octave band: 63,125,250,500
Lw(Okt): 100.194.1 91,1 90.1
1K 2K 4K 8K cycles per second
87.1 83.1 78,1 70,1 dB

accessories
Belt: SPB, 2500lg
Ven.Sch:SPB/2/250
Mot.Sch:SPB/2/250
PTC resistor
Rep. switch for FU
Wiring Rep. switch
Ring circuits pfa
Canvas inside

accessories device:

1 x LICHTSCH.kpl.m GL
2 x SEDIMENT BOWL KPL TUERE AT4
3 x DOUBLE HEBELVERSCHL. AT4
1 x FR-O.leu. 60W IP 44
2 x VERD.beleu.m.kabelabzw.k.
2 x FLAP A. 24x12
1 x KLAPPENST.m.dm2.2 230V SR
2 x B STS JK1836X 918 L24XL12
3 x POTENTIAL EQUALIZATION STS
1 x SEDIMENT BOWL KPL COVER AT4
1 x FR-r.leu.100w IP 55
3 x SINGLE LEVER CATCH. AT4
1 x GITTERW. L10 24X24
1 x B STS 710 899X 899

special features:
- during the device list those must
- siphon height to be considered!

Dimensions:
Length 6349 mm broad: 1912 mm height 2020 mm
Weight: 2281 kg

Fabr. AL-ko
Type: AT4-24x24 INNENRAUMAUFSTELLUNG
 

Steam air moisturizer

Electrical steam air moisturizer with stainless steel housing,
Electrode heating and exchange steam cylinder.
Intregierter pi automatic controller for link to all commercial
external rule signals. Intelligent quasi-continuously regulation
Link on a/from - hygrostat. Additionally second rule signal input
for constant supply air dampness delimitation or outside air-damp-dependent
performance-specification-alphanumeric LCD announcement of operational data in
Form of text and numbers. Menu-led device adjustment over
user friendly keyboard.
Selective remote indication of operating condition, ready status, due
Service requirement and operational disturbance over 4 relay contacts floating.
Designated for filling cup open for channel printing of -800 + 1500 Pa with inserted atmospheric.
In accordance with DIN 1988 no pipe disconnector necessarily.

Technical data:
Max. steam generating capacity: 90 kW
Electrical connected load: 2x 33.75 kW
Water system pressure: 1....10 bar of Ue
Water temperature max. 40
Wasseranschluss "
Water drain 30 mm
Steam hose connector 2x DS 80
Filament voltage: 400V/3Ph/50Hz
Control voltage: 230V/1Ph/50Hz
Dimensions: B:490 H: 700 T: 350
Unloaded weight 40 kg
Operation weight 120 kg

steam hose DS 80 to Condair MC/ec/cp/cp2
Diameter 54/45
 
 

condensate hose KS 10
to CP / MK4 steam humidifier
Diameter 8/11,5
 
 

Exhaust system

Combustible gas - radial fan design BVRA

checked according to DIN 18232, part of 6(tu Munich) with general build-up-obviously
Permission Z-78, 1-16

list of the BVRA outside of the fire zone, engine cooling also
Ambient air max. 40 for the promotion of combustible gases max. 620 - 90 min.

Consisting of:
Spiral housing from steel sheet, welded, and sufficiently reinforces.
Blowing out connecting piece with flanges according to DIN 24185, series 3
Intake with flanges according to DIN 24154, series 3
Radial impeller on one side sucking, in welded steel plate design,
dynamically balanced according to DIN ISO 1940, quality grade G 6,3
Fan wave with cooling disk and rotary shaft seal in
Pedestal bearings stored.
Belt drive completely with two V-belt pulleys, drive belts
and contact protection box.
Painting of the housing with temperature-steady Alufarbe(Innenaufstellung)

technical data:

Flow rate: 6000 m/h
Temperatur(Auslegung) 20
Temperature max. / Service life 620C / 90
dynamic printing 115 Pa
Total increase in pressure 815 Pa
Fan number of revolutions 1730 U/min
Efficiency 75 %
Power demand at the wave 1.8 kW
Total sound power level 101 dB
Weight 155 kG

engine
Three-phase motor after International Electronical Commission standard
Design B3
Enclosure IP 54
Insulation class B
in a single step mode
pole-changing after Dahlander
pole-changing with getr. Windings
Engine speed 1500 U/min
Engine performance 2.2 kW
Engine rated current
Voltage 400V/50 cycles per second

of waste gas sound absorbers type QAN 250 - 35
Flow rate max. 6000 m3/h
Medium temperature max. 530C, briefly 630C
Port size 250
Inclusively. Special fittings

ail pipe line system
Consisting of:
6 St. Exhaust interface size 250 with pick-up flanges
and cover plates for the free exhaust entrance.

4 St. Exhaust interface size 100 with pick-up flanges
and cover plates for the direct engine link also
throttle shut-off valve downstream for control of the
Exhaust gene printing over Elektrostellantieb with position control.

5 St. Compensators made of high-grade steel with flange connection to
Range of the Rhrleitungssystems.

6 St. Shut-off valves with pneumatic drive and acknowledgement
to the control for the test operation the necessities
Exhaust exhaust.

50 mm of pipe insulation with aluminum cover

Div. of special fittings and mounting plates for the installation of the waste gas system

blow - piping out with deflector hood in high-grade steel
with roof execution, wind protection and isolation.

Accessories
Flexible connecting pieces
suction-side
printing-laterally
Condensate drainage connecting piece
Inspection opening at the fan housing
Set of feather/spring shock-mounts
Lagging of the fan housing
CHILLED WATER SET

LIQUID RADIATOR 30 RA 160

in form of an air-cooled unit ready for installation for
External list, manufactured after the quality standard ISO 9001,
starting from size 090 with 2 independent refrigerant cycles.
Housings and frameworks consist of stable galvanized isolated
Steel sheet with an additional weather-proof polyester burning
lacquer finish in the colour ral 7035, particularly noiseless execution.
Wide doors and removable lining items facilitate
Acces and service. The modern technical conception of the devices
enables the application both in the climatic and within the process cooling area.
The liquid radiator in the factory a test run lasting several hours under standard conditions submitted with check of the
medium volume
medium temperatures, capacity flows etc. to it belonged
the adjustment and funktionskon-trolle of the rule and safety
mechanisms, among other things. High and low pressure switch, freeze protection.
Performance data are checked after EUROVENT standard.

COMPRESSOR
Suctiongas-cooled Hermetik spiral compressor of the new generation,
onto rubber shock-mounts installs, with compressed gas over
hitzungsschutz, protective relay for motor, durable engine coil, oil pump,
Sediment bowl, check valve in the pressure pipe, direct start,
Refrigerant links welded or with Rotalockanschluessen
provided, oil balancing circuit with two compressors in a cycle,
insensitively to liquid impacts and direction of rotation reversal.

EVAPORATOR
Compact high speed plate-type heat exchanger, manufactured made of high-grade steel,
laid out for dry refrigerant expansion and optimal Waermeuebertra
gung, with particularly small refrigerant contents, starting from size 090
with 2 separated refrigerant cycles. The evaporator is against sweating
wasserbildung generally with diffusion-close 19 mm a thick
Foam material isolation provide and possesses one thermalstatically
regulated electrical Begleitheizung, as freeze protection to -10C to ambient temperature-admissible operating
pressures is water-laterally 10 bar,
refrigerant-laterally 30 bar. The medium links outward are as gas
Threaded connections executed.

AIR-cooled CONDENSOR
Mehrreihiger heat exchanger, 2 pieces starting from size 090, in more space-saving
vertical arrangement, with a large exchange and surface. High speed lamellas made of pure aluminium are by
expansion also
the copper core pipe serrated inside fixed connected. A Unterkuehler
for the performance increase is constituent of the heat exchanger.

FANS
Directly more propelled, statically and dynamically out more heaved,
noiseless?Flying Bird? Axial flow fan again-turns out
cash injection moulding bonding material, with vertical air-blow out and
Contact protection lattice. The progressive Profilschaufelkonstruk-
tion with angegegossenem cover tape and even Schaufel-
load causes low number of revolutions, small Leistungsauf-
nahme and minimum sound emission by suppression that
Niederfrequenz-Spitzentoene.Der 2-step weather-protected drive
engine (enclosure IP55) is with maintenance-free stocks, wave sealing
and thermal overload protection equipped. With partial load or low
The engine switches outside temperatures automatically to the small
Number of revolutions over. The fan engine unit is for the avoidance of
Oscillation transfers separately from the housing installs.
 
 
 
 
 
 
 
 

REFRIGERANT CYCLE
Perfectly hermetic refrigerant cycle from copper tube with the necessary cooling armatures such as liquid stop valve
with filler connector, sediment bowl with humidity indicator, filter dryer with removable block in corroding,
thermalstatic expansion valve with MOP delimitation, verrohrt completely by the factory.

A special valve enables the link of a refrigerant recuperation device with service work.

Intake with a 13 mm strong Armaflex isolation with vapor diffusion barrier. Cooling system under protecting glass
soldered, in the factory printing-checked, leaking, dried and evacuated as well as with the refrigerant operation filling
R407C provide.

CARRIER PRO DIALOG PLUS REGULATION

the PRO DIALOG plus monitoring system is a durable and a user-friendly, auto+adaptive, electronic Steuer-und
monitoring system operating on microprocessor base in modular construction with the pertinent thermalstatic
expansion valves and enclosure the essentially following configuration:

Display and operating tablet with an input field for reading, modifying and acknowledging operation information and
with operating mode selection switch.

Sensors for entering chilled water in and outlet temperature, Liquefaction and evaporation pressure in all cycles and
suction gas burning temperature in all cycles.
Regelmodule consisting of a main module with integrated microprocessor, analogue-digital converter for the attached
sensors (high and low pressure) as well as appropriate control and rule modules for the other components.

Regelmodule consisting of a main module with integrated microprocessor, analogue-digital converter for the attached
sensors (high and low pressure) as well as appropriate control and rule modules for the other components.

The following functions are available according to standard:

Regulation of the chilled water outlet temperature by an PID algorithm, which makes the power adaption of the
compressor levels as a function of the chilled water inlet temperature and the selected desired value.
Regelmodule consisting of a main module with integrated microprocessor, analogue-digital converter for the attached
sensors (high and low pressure) as well as appropriate control and rule modules for the other components.
Refrigerant cycle management system with condensor pressure control in several
Levels.
Cooling delimitation for adjustment to the load changes
(ramp adjustable of 0,1 - 1,1C per minute).
Load-sensitive operation hour adjustment of the compressor run times, i.e. modification of the start sequence.
Control of the chilled water pump with slowing-down time.
Stoerdiagnosesystem for the following safety devices:
Operating supervision, current monitoring, pump monitoring, safety high pressure guard and refrigerant filling
monitoring for each cycle, cooling carrier current monitoring

by temperature difference measurement, cooling carrier freeze protection over
being awake and diagnosis of all rule modules and sensors.
by temperature difference measurement,
 
 
 
 

External connection types of the PRO DIALOG PLUS
Monitoring system:

digital inputs (floating): external release, build-lateral safety devices, capacity delimitation, activation of the
2. Chilled water temperature desired value (with accessories Opt.155).
Fault signal for each cycle, 24 V.
Similar inputs 0 - 10 V DC: Desired value shift of the chilled water temperature.

CONTROL CABINET

manufactured and completely wires 60204 after EN and UVV/vbg 4. It corresponds to the EMV guidelines and is
equipped with the following components:

Main switch, strip for main stream feed (400V/3Ph/PE/50Hz), trafo for control current 24 V, performance contactor
and protections for compressor engines and ventilatormotoren as well as pump contactor for Hydronik module.
Auxiliary relay and steuerschuetze as well as trafo for pro dialog relay module, controls with display.
Safety chain consisting of: DBK/sdbk, filling loss switches, internal fan protective relay for motor as well as sensors
for temperature transfer to the microprocessor module, temperature-controlled radiator heating.

All devices and cables according to the connection diagram defines.

TECHNICAL DATA 30 RA 160

operation cooling capacity 244 kW
Compressor capacity accommodation
Operation 83 kW
Device capacity
Operation 86 kW
86Leistungsregelstufen 6
Minimum performance 16.6 %
Refrigerant

R407C
Radiator data
Medium L.g. %
Inlet temperature 12 C
Outlet temperature 6 C
Flow rate 9.64 1/s
Pressure loss 19 kPa
Contamination factor 0,44x10-4 mK/W
Wasseranschluesse 2 1/2 inch
Condensor data
Lufteintrittstemperatur 35 C
Number of fans 4 pieces
Fan diameter 775 mm
Fan number of revolutions
Volumetric air flow 20.90 m/s
Air inlet min. Standard -10 C
Compressor data
Number of compressors 4 pieces
Foerdervolumen 48.3 1/s
Electrical data
Device rated current IN for cable sizing
209,1
A
Device rated current after
EUROVENT standard
179,1
A
Max. device starting current
Voltage/frequency 354,6
400V/3Ph/50 A
Cycles per second
Device weights and Dimensions
Operation weight 2395 kg
Refrigerant amount of filling 35/35 kg
Length 3351 mm
Width 2279 mm
Height of 1674 mm

of sound specification
Sound pressure level in 10 m distance after EUROVENT standard

69

dB(A)
Make CARRIER
Type 30 RA 240

LINE-up, ADJUSTMENT AND TRANSFER

ready for operation of the set up, elektro-und water-laterally
attached liquid radiator with simultaneous
Briefing of the operating personnel

AVAILABLE OPTIONS (DELIVERY TIME EXTENSION):

Opt. :

Gold Fin? coating of the condensor also
Epoxyd and PU, suitably for maritime climate
and fewer aggressive industrielle and urban
Environment, no performance or gewichtsaenderung.

DM:
Opt. 6:

Execution for brine outlet temperatures to
-10C, with modified expansion valves, ange
passtem evaporator and double evaporator
isolation, incl. the necessary accessories.
DM:
 

Opt. 23:

Grille for the condensor

DM:

Opt. 155:

Communication module for the extension of the active
lung, with interface R-S 485, necessarily
with parallel operation of 2 machines, time off
haengiger a/elimination of the liquid radiator,
time-dependent level circuit of the condensor
fans.

DM:

Switchgear cabinet ventilation

stahlblechgehaeuse, colour ral 7032. Minimum sheet metal strength 2,0mm
Mounting plate 3,0mm primes.
Lacquer finish structure lacquer ral 7032. Resting upon one rubber-sealed
Continuous doors and hinges on the inside.
Enclosure without installations IP 55 DIN 40050.
Engraved identification plates for door installations.
Resources, automatic controller, current supply issues needed installation of all for the system for pumps, chilled
water set, ventilation system. (15% reserve)
Designation of all resources in accordance with circuit documents
Line-up terminals for all after externalled lines in accordance with connection diagram
Execution switchgear cabinet according to VDE 0660 if not differently indicated
Additionally to the scope of supply belong the creation of the switching and
Circuit diagrams in CAD execution
Data protection on diskette in DXF format
Dimensions depending upon execution with at least 20% reserve

Wiring

creation of the wiring of all peripheral devices, how
Flap engines, feeler, safety feeler, supply air engines,
Exhaust fan, control lines and holding wires for that
Chilled water producer.

Chilled water transfer station

consisting of one 2000 ltr buffer memory, pump loading station and
the pumps necessary for the operation, expansion tanks, locking off
slidegate valves, manometers, safety switches
as well as the complete electrical integration into the chilled water set
complete isolates for chilled water temperatures to 0 C.
Glycol proportion of 30%.

Chilled water pipework system

approx. 50 m simple length (100 m) forwards -und return
Main inlet chilled water to the ventilation system
consisting of 2 " smoothly pulled steel tube
Slide valves, adapters, welded
Including all for the perfect function
the chilled water supply needed sections.
Vor-und return with 19 mm of steam-close isolation
inclusively. Mounting material
 

Water heater
Consisting of buffer memory 1000 ltr isolates with expanded polystyrene
Flat and four links for in each case a before and a return
for electrical instantaneous water heaters suitably.
Performance for each instantaneous water heater 24 kW
Primary pumps for buffering of hot water
Secondary pump for the feed of the PWW Tauschers
Safety device for the protection of the DH
Pipework system from the memory to the ventilation system with rule station
incl. all necessary stop valves and fittings
 
 

Supply air - and exhaust air duct system with 4 St. Muffler

from galvanized channel with the necessary form - and adapters,
as switching system with 4 electrical claimant Jalosieklappen for the controlled operation of sound measuring space
and engines - test stand.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Prices - and scope of supply